327 results found
-
Include Items to routing rules
Would it be possible to include items or stay products to the routing rules? We book breakfast as a separate product, however this is included to the overnight charges paid over OTA.
6 votesCovered by the new billing automation
-
Mix multiple cancelation policies within one rate
To setup 2 policies applicable to 1 rate who has different season instead of creating new rates for each season. The current system block guest from booking through 2 seasons. Example: A stay Dec 17 to Dec 25. December 17 to 20 is low season and December 21st to 25 is holiday/peak season. Low season is 1 policy and Peak/Holiday is 1 policy. Currently, I have 2 rates due to the policy issue.
28 votes -
Origin for Walk in
Due to the actual situation we have a high interest in walk in numbers. At the moment there is possibility to get a walk in figure. It can be only assumed reservations for the same day are walk ins, but its not clear at all. Therefore we request a walk in origin code which can be much better tracked.
25 votesHello from the Mews product team. Thank you for your suggestion. You are already able to select ‘In person’ from the origin dropdown to collect this information and report on it.
Remember, keep up to date with our releases by checking out our release notes – https://www.mews.li/app/release-notes and come and visit our monthly webinars!
The next webinar is on April 1 – https://www.mews.com/en/resources/webinars/product-webinar-april-2021
-
Scheduled Custom Dates
I would like to be able to set my own custom dates when scheduling reports instead of using the preset settings.
7 votesHello from the Mews product team,
Thank you for your suggestion. It is already possible to set up a start date and frequency for all scheduled reports. Please check this guide for more detailed information.
Kind regards,
The Mews Team
-
Favorite Reports in Mews
Would like the ability to save favorite reports in Mews rather than have to reset the filters each time. We can save this for export, but if I only wish to view the report, I must reset the filters each time and remember the previous setting used. This is cumbersome and prone to mistakes.
If there was a favorite report section under the burger menu, it would be easy to access specific areas in Mews to display reports that are frequently used. These can be exported or printed, but in most cases, just need to be able to save the…
2 votesHi Robert,
Thank you for the feedback.
It is currently possible to view your favorite reports with the filters preselected by using custom links. You can set this up by:
1. Opening a report in Mews > select the filters you require.
2. Click “View” to apply the filters.
3. Copy the URL and paste it in as a custom link.
4. Save your custom link and refresh the page
5. You will now be able to access the report with pre-selected filters by opening the burger menu > select custom links > select the custom link you have createdIt is also possible to access the custom links using a keyboard shortcut. You can learn more about both in the guide linked below:
https://intercom.help/mews-systems/en/articles/4244312-create-modify-or-delete-a-custom-link
-
Collapsible menus in the Paymaster Billing menu
Hello!
I work in the reception of a hotel where we have a lobby shop. When we go to billing on the paymaster account the list of products we can add is rather long, with the number of items we have.
Therefore I request the feature to collapse categories within the product list so that it is easier to find certain items/products in our list that we wish to add to the bill.
The collapse menu function could also be added to any menu where there are categorized lists for easier navigation when lists become long.
3 votesCategories of products can now be searched before being added.
-
Consumption date for "Once" products
Consumption date of once products is not shown on the Guest in house report. This report is used by the F&B team to determine whether a specific guest has purchased breakfast or not on a particular day. Product report does not show room numbers and therefore cannot be used when guests come to the restaurant.
Please add the consumption date of "Once" products so it can be easily visible on a single report without needing to add notes.
137 votesHi Mewsers!
We are very happy to inform you that we have officially released a new filter in the Guest in house report, that will allow you to view products consumed during the report’s selected interval.
We hope this update will help your teams handle the morning breakfast rush a little easier.
To learn more about the update, please visit our release notes page.
-
Group invoice information by guest name
Summarize invoices with multiple guest profiles by guest profile.
With group reservations or reservations with more than one guest profile the invoice turns out very chaotic i.e.:
Stay 1234 (guest name 1, stay dates)
Staypackage
City tax
Stay 1235 (guest name 2, stay dates)
Staypackage
City tax
Stay 1236 (guest name 3, stay dates)
Staypackage
City tax
Dinner (guest name 1)
Dinner (guest name 2)
Dinner (guest name 3)
Minibar (guest name 2)
Minibar (guest name 1)Would be great if could be ordered by guest profile i.e.:
Stay 1234 (guest name 1, stay dates)
Staypackage
City tax
Dinner
Minibar …14 voteshttps://releases.mews.com/en/new-group-invoicing-layout-review-bills-with-confidence-RZziyebJ
-
Remove payment button for Unassigned in Billing screen
Please remove the option to charge the customer card against all items under Unassigned.
This is causing operational problems, because is much easier to charge fully for current and future stays all together by mistake or while in a rush. The only way to prevent wrong charging is to manually move the charges to a New Bill.
This is a technical disadvantage.Old billings screen was able to prevent this as products for future reservations were kept on the left hand side. There was no option to collect payment against them.
11 votesHello Mewsers,
We are very happy to inform you that we have officially released functionality that will allow you to rename a bill title on the new billing screen.
To learn more, head over to our release notes page linked below, or select the pencil icon next to a bill title to begin the product walk through for the new feature.
-
334 votes
-
Unavailable Billing page from Action log tab in reservation module
Error "Sorry, this page isn't available or you are not authorized." pops up when clicking on the billing of the customer through the Action log tab of the reservation
4 votesHello from the Mews product team.
We are so pleased to let you know that your feature request has been released. You are now able to see billing items in the action from the reservation module thanks to our new billing action log.
All links are now clickable have an easy to ready user interface that gives you a detailed view on the actions performed on the bill relating to that reservation. You can learn more about the billing action log below:
https://help.mews.com/s/article/track-changes-to-bills-with-action-log?language=en_US
Thank you again for sharing your idea!
-
Show in house status for guest with future bookings in the Accounting ledger
Currently guests in house with future bookings aren't shown as in house in the accounting ledger.
It confusing for receptionists to check what is due and why as they have some In House Clients and some that are In house but not shown as is…
4 votesSolved through the new accounting ledger. New ledgers are in progressive roll out and will released to all countries by the end of January.
-
i keep getting error messages when trying to delete an empty ledger
this is now the second or third day this is happening!
really annoying and wasting a lot of time having to refresh after every billing handling, especially as system has been really slow at times in the last two or three days.
please fix1 vote -
Monthly pricing of services
Would it be possible to pay per month and not per night? For exampe, our tenants stay at our residence 6 or 12 months. One month costs €510,-. Now I have to calculate it back to the costs per night. So for every month I have to divide the €510,- by 28, 30 or 31 nights. This almost never ends on a rounded number wich makes it a lot of work and the chance of making a mistake or typo is big. Please let me know if this would be possible.
1 voteHello, monthly bookable services in Mews allow you to price your services on monthly basis: you do not have to define price for each night, you price full months and there is only one item (month) instead of 30 items (nights) on the bill.
In the coming months, the team will focus on improving the functionality for long stays (monthly reservations) and introduce pro-rating, flexible housekeeping and product posting. We are also looking into payments automation via direct debit.
Read more about the monthly services here.
Kind regards,
Martin Kucera
Senior Product Manager
Mews
-
Change colors back to how they were (blue = dirty, black = inspected, green = clean, yellow - ooo, red = oos)
Change MEWS timeline and space status colors back please, (blue = dirty, black = inspected, green = clean, yellow - ooo, red = oos)
and IF you change, please INFORM BEFOREHAND!!!!4 votesHello from the Mews product team. We are pleased to let you know that the new version of Housekeeping and Reservation colors has been released. You can have a look at our release notes at https://releases.mews.com/en.
We would also like to know what you think about these changes and get your feedback. You can answer a quick survey on the link below.
Link: https://mews.typeform.com/to/aCFioorw
Thank you again for sharing your idea!
-
Profile reports with language
A report where it shows the guest language.
4 votes -
To move current stay-overs to a different room
How is is not possible to move guests to another room, without making a new reservation or splitting a reservation. Too much work in to a simple action. Too much work where is no extra time for these trying times with too little employees.
2 votesHello Sjoerd,
Thank you for contacting the Mews Product team.
We currently offer several ways to move reservations including dragging and dropping reservations to another room from the timeline, as well as the ability to move reservations to another space from the status tab of the reservation screen or to a different space category from the properties tab on the reservations screen.
Below you will find a guide that will walk you through each of the options offered. Should you have any additional questions, please contact our support team.
https://intercom.help/mews-systems/en/articles/4339329-how-to-upgrade-and-downgrade-a-reservation
-
task field
Is it possible to make the task field in MEWS bigger again so that you can drag the field to write info in it?
Before the update, you could drag the "Description" window larger using the arrows at the bottom right.
It would be great if that were possible again. Thank you in advance. Tina1 voteHello Tina,
We are happy to inform you that we have added the ability to expand the task field back to Mews Operations.
Thank you very much for sharing your feedback with us. Please do continue sharing your feedback and requests so that we can continue to improve Mews.
-
New Billing Adjustment
I don't mind the new billing screen, once you get used to it, it is quite easy to use.
One thing I would suggest is that in the new billing screen, we move a lot of items to Paymasters and we now can't see which item belongs to which guestIt used to show as:
Stay 1129 (Jane Smith, 1/12/2020-2/12/2020, Standard Room, 16) - $150Now shows as:
Past, 1/12/2020-2/12/2020 - 1129 x1 - $15011 votesHello Madelaine,
We apologies for the delayed response. However, we are happy to inform you that the functionality that you requested has been released.
You are currently able to see the name of a the original guest who owned a bill before it was moved to a paymaster account.
We hope this update will be helpful for your day to day tasks.
Kind regards,
AldairProduct Manager, MEWS
-
See a month or longer on the timeline
like when you are scrolling up / down you condense the number of spaces displayed on the timeline, you should also be able to do that with the number of days displayed. It would be great if you would be able to see at least one full month on the timeline (ideally would be at least two months!)
31 votesHello Mewsers,
Thank you for sharing your feedback with us.
We are happy to inform you that we have introduced, a new filter on the timeline that allows you to view the timeline by month, in addition to the day view.
You can learn more about this feature in the guide linked below:
- Don't see your idea?